 | | Similar to image | | RELAY, N-TYPE WITH 4 NO CONTACT FOR AC 230V 16A CONTROL AC 24V |
| |
| Technical data: | | |
| Design type | | 5TT4 2 switch relay |
| Type, explanations | | switch relay for alternating voltage |
| Type, explanations / additionally | | 4 NO |
| Mounting depth | mm | 90 |
| Number of NC contacts | | 0 |
| Type of mounting | | DIN rail |
| Number of change-over switches | | 0 |
| Number of NO contacts | | 4 |
| Number of pitch units for width | | 1 |
| Type of voltage | | |
| | | AC |
| Switching capacity apparent power | | |
- for uncorrected fluorescent lamp load
| V·A | 696 |
| Switching capacity real power / for filament lamp load | W | 1,200 |
| Switching capacity current / at cos phi 0.6 | A | 16 |
| Operating current / rated value | A | 16 |
| Control voltage frequency | | |
| | | |
| | Hz | 50 |
| | Hz | 50 |
| Control voltage/ _1 | | |
| | | |
| | V | 24 |
| | V | 24 |
| Type of voltage / of supply voltage | | AC |
| Relay design | | partially electronic |
| Operating tolerance | | 0.8 to 1.1*Uc |
| mounting position | | optional |
| Rated operational voltage Ue / AC | V | 400 |
| degree of protection / according to German industrial standard EN 60529 | | IP20, with connected conductors |
| Connection terminals / ± screw (Pozidriv) | | 1 |
| Rated operational current Ie / at cos = 0.6 ... 1 | A | 16 |
| Rated control voltage Uc/AC | V | 24 |
| Rated impulse withstand voltage Uimp | kV | 4 |
| Rated power loss Pv / per contact at 16 A | W | 1 |
| Electrical service life / with le/Ue or specified lamp load | | 50,000 |
| Manual operation | | Yes |
| Climatic resistance / at 95 % relative humidity acc. to DIN 50015 | °C | 35 |
| Contact cards / type | | 4 NO |
| Contact opening | | > 1.2mm |
| Minimum contact loading | | 10V ; 100mA |
| Safe isolation / creepage distance and clearance between solenoid/contact | | > 6mm |
| Different phases / between solenoid/contact | | permissible |
| Permissible ambient temperature | | -10 to +40°C |
| Rated frequency fc | Hz | 50 |
| Rated power loss Pv / solenoid W/VA | | 4.8/6.0 |
| Conductor cross sections / flexible, with end sleeve | | 1 to 6mm? |
| Conductor cross sections / rigid | | 1.5 to 6mm? |
| Supply voltage / maximum | V | 400 |
| Supply voltage / minimum | V | 400 |
| |
| Certificates/approvals: |
| General Product Approval | Declaration of Conformity | | ROSTEST | | |
| |
| |
| last change: | Aug 26, 2011 |
